Aluminum Sheet 1050 H14/H24 CC – Properties, Applications & Buying Guide

When sourcing aluminium sheets globally, understanding alloy, temper, and format is essential. AA1050 is a commercially pure aluminium alloy (~99.5% Al) known for excellent corrosion resistance, high formability, and good conductivity. Xuntai Aluminum supplies high-quality 1050 H14/H24 CC sheets suitable for industrial, architectural, and decorative applications worldwide.

cc 1050 aluminum sheet h14 h24

Temper Designations: H14 vs H24

  • H14 (Half-Hard): Cold-worked, provides tensile strength 105–145 MPa, moderate elongation (~12%), ideal for flatness and light bending.

  • H24: Work-hardened and partially annealed, offering higher elongation (~18%), better for deep drawing and flexible components, slightly lower strength.

CC (Commercial Coil) Format
Coils provide efficient production, customizable widths, and cost savings, especially for high-volume manufacturing and global shipping.

Chemical & Mechanical Properties

  • Composition: Al ~99.5%, Si ≤0.25%, Fe ≤0.40%, Cu ≤0.05%.

  • Mechanical: H14 tensile 105–145 MPa, H24 tensile 95–135 MPa; elongation H14 ~12%, H24 ~18%.

  • Physical: Density 2.71 g/cm³, modulus 71 GPa, melting point ~650°C.

  • Fabrication: Excellent cold workability, weldable, non-heat-treatable.

Applications

  • Signage and decorative panels

  • Food packaging and chemical containers

  • Reflectors, lighting, and battery connectors

  • Architectural cladding, roofing, and industrial components

Global Buying Guide

  • Select temper (H14 vs H24) based on strength vs formability needs.

  • Confirm compliance with ASTM B209, EN 485, or relevant international standards.

  • Check sheet/coil thickness, width, surface finish (mill, anodized, PVC coating).

  • Consider supplier reliability, packaging, and shipping for safe global delivery.

Why Xuntai Aluminum
Xuntai Aluminum offers certified 1050 H14/H24 CC sheets, globally shipped, precise, and well-packaged. Our products support manufacturers and designers worldwide seeking durable, flexible, and corrosion-resistant aluminium solutions.

Conclusion
1050 H14/H24 aluminium sheets provide the right balance of formability, corrosion resistance, and cost-effectiveness. Choose the appropriate temper and CC format for your application. Contact Xuntai Aluminum for quotes, samples, and technical support for global orders.

Share this post